OEM Factory for Flexible Packaging Film - Low Melting Point EVA Film – Zonpak
OEM Factory for Flexible Packaging Film - Low Melting Point EVA Film – Zonpak Detail:
ZonpakTM low melting point EVA film is a special kind of packaging film which can be used on a form-fill-seal (FFS) bagging machine to make little bags of rubber additives (e.g. 100g-5000g). The bags of additives can be direct put into an internal mixer during rubber mixing process. Bags made of the film can easily melt and fully disperse into the rubber as a minor ingredient.
PROPERTIES:
- A wide range of melting points are available for different applications.
- Stable chemical properties, fits most rubber chemicals.
- Good physical strength, suitable for most automatic bagging machines.
- Eliminate the disposal of packaging waste for the material users.
- Helps material users raise work efficiency while decrease waste of materials.
APPLICATIONS:
- peptizer, anti-aging agent, curing agent, aromatic hydrocarbon oil
Technical Standards |
|
Melting point | 65-110 deg. C |
Physical properties | |
Tensile strength | MD ≥16MPa TD ≥16MPa |
Elongation at break | MD ≥400% TD ≥400% |
Modulus at 100% elongation | MD ≥6MPa TD ≥3MPa |
Appearance | |
Surface of the product is flat and smooth, there is no wrinkle, no bubble. |
Product detail pictures:
Related Product Guide:
Using a full scientific good quality administration system, very good quality and superior faith, we win good standing and occupied this discipline for OEM Factory for Flexible Packaging Film - Low Melting Point EVA Film – Zonpak, The product will supply to all over the world, such as: Durban , Buenos Aires , Croatia , With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
By Kevin Ellyson from Cancun - 2018.09.19 18:37
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Linda from Muscat - 2017.02.18 15:54