100% Original Specialty Packaging Film - EVA Film for FFS Bagging machine – Zonpak
100% Original Specialty Packaging Film - EVA Film for FFS Bagging machine – Zonpak Detail:
ZonpakTM EVA film is specially designed for packaging rubber and plastic additives on FFS (Form-Fill-Seal) bagging machines. Little bags of additives (100g-5000g) can be made and supplied to the rubber mixing plants. As the film has low melting point and good compatibility with rubber, these little packages can be direct put into a mixer by the user in the mixing process. The bags can easily melt and fully disperse into the rubber as an effective ingredient. It brings much convenience to material users and helps raise production efficiency while decrease waste of additives and chemicals.
EVA films with different melting points (65-110 deg C) are available for different materials and mixing conditions. Thickness and width of the film can be custom made as customer required.
|
Technical Standards |
|
| Melting point | 65-110 deg. C |
| Physical properties | |
| Tensile strength | MD ≥16MPa TD ≥16MPa |
| Elongation at break | MD ≥400% TD ≥400% |
| Modulus at 100% elongation | MD ≥6MPa TD ≥3MPa |
| Appearance | |
| Surface of the product is flat and smooth, there is no wrinkle, no bubble. | |
Product detail pictures:
Related Product Guide:
Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for 100% Original Specialty Packaging Film - EVA Film for FFS Bagging machine – Zonpak, The product will supply to all over the world, such as: Morocco , Cambodia , Macedonia , By continuous innovation, we will present you with more valuable items and services, and also make a contribution for the development of the automobile industry at home and abroad. Both domestic and foreign merchants are strongly welcomed to join us to grow together.
By Liz
from Muscat
- 2018.02.21 12:14
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Ivy
from Belarus
- 2017.03.08 14:45
