Factory Free sample Multilayer Film Packaging - EVA Packaging Film for Rubber Additives – Zonpak
Factory Free sample Multilayer Film Packaging - EVA Packaging Film for Rubber Additives – Zonpak Detail:
ZonpakTM EVA packaging film is specially designed to make little bags of rubber additives (e.g. 100g-5000g) with the automatic form-fill-seal (FFS) bagging machine. Various rubber additives or chemicals (e.g. rubber peptizer, anti-aging agent, curing agent, cure accelerator, rubber process oil) are commonly used in the rubber mixing process, and only little amounts of these materials are needed for each batch. So these little packages can help the material users improve work efficiency and avoid material waste. The film is made from EVA (copolymer of ethylene and vinyl acetate) which has a specific lower melting point and good compatibility with rubber or resin materials. So the bags together with the materials contained can be direct put into a mixer. The bags will melt and disperse into the rubber compound as a minor effective ingredient.
Films with different melting points (65-110 degree Celsius) and thickness are available for different using conditions.
|
Technical Standards |
|
| Melting point | 65-110 deg. C |
| Physical properties | |
| Tensile strength | MD ≥16MPa TD ≥16MPa |
| Elongation at break | MD ≥400% TD ≥400% |
| Modulus at 100% elongation | MD ≥6MPa TD ≥3MPa |
| Appearance | |
| Surface of the product is flat and smooth, there is no wrinkle, no bubble. | |
Product detail pictures:
Related Product Guide:
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for Factory Free sample Multilayer Film Packaging - EVA Packaging Film for Rubber Additives – Zonpak, The product will supply to all over the world, such as: azerbaijan , United Arab emirates , Iran , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Victoria
from Swiss
- 2017.03.28 16:34
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Daisy
from Ghana
- 2018.09.21 11:01
