Good Quality Low Melt EVA Film - EVA Batch Inclusion Film – Zonpak
Good Quality Low Melt EVA Film - EVA Batch Inclusion Film – Zonpak Detail:
ZonpakTM EVA batch inclusion film is a special kind of packaging film with specific low melting point. It is mainly used on the automatic FFS (form-fill-seal) packing machine to make little packages (100g-5000g) of rubber additives or chemicals. Due to the film’s property of low melting point and good compatibility with rubber and plastic, these little packages can be direct put into an internal mixer during mixing process, and the bags will melt and fully disperse into the mix as an effective ingredient. It brings convenience to the material users and eliminates packaging waste disposal.
Different melting points are available as customers required. Stable chemical properties and high physical strength of the film make it suitable for most rubber chemicals and automatic packaging machines.
|
Technical Standards |
|
| Melting point | 65-110 deg. C |
| Physical properties | |
| Tensile strength | MD ≥16MPa TD ≥16MPa |
| Elongation at break | MD ≥400% TD ≥400% |
| Modulus at 100% elongation | MD ≥6MPa TD ≥3MPa |
| Appearance | |
| Surface of the product is flat and smooth, there is no wrinkle, no bubble. | |
Product detail pictures:
Related Product Guide:
We know that we only thrive if we could guarantee our combined price tag competiveness and quality advantageous at the same time for Good Quality Low Melt EVA Film - EVA Batch Inclusion Film – Zonpak, The product will supply to all over the world, such as: Senegal , Indonesia , Peru , Our production have been exported to more than 30 countries and regions as first hand source with lowest price. We sincerely welcome customers from both at home and abroad to come to negotiate business with us.
By Norma
from Detroit
- 2017.08.15 12:36
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Carlos
from Benin
- 2017.03.08 14:45
