High Quality Low Melt FFS Film - EVA Packaging Film for Rubber Chemicals – Zonpak
High Quality Low Melt FFS Film - EVA Packaging Film for Rubber Chemicals – Zonpak Detail:
Rubber chemicals (e.g. rubber peptizer, anti-aging agent, curing agent, cure accelerator, aromatic hydrocarbon oil) are usually supplied to the plants in 25kg or even larger packages, while only little amounts of these materials are needed for each batch in the production. Thus the material users have to repeatedly open and seal the packages, which can cause material waste and contamination. To solve this problem, low melt EVA film is developed for the rubber chemical manufacturers to make little bags of rubber chemicals (e.g. 100g-5000g) with the automatic form-fill-seal (FFS) bagging machine. The film has a specific lower melting point and good compatibility with rubber or resin materials. So the bags together with the materials contained can be direct put into a mixer, and the bags will melt and disperse into the rubber compound as a minor effective ingredient.
APPLICATIONS:
- peptizer, anti-aging agent, curing agent, rubber process oil
|
Technical Standards |
|
| Melting point | 65-110 deg. C |
| Physical properties | |
| Tensile strength | MD ≥16MPaTD ≥16MPa |
| Elongation at break | MD ≥400%TD ≥400% |
| Modulus at 100% elongation | MD ≥6MPaTD ≥3MPa |
| Appearance | |
| Surface of the product is flat and smooth, there is no wrinkle, no bubble. | |
Product detail pictures:
Related Product Guide:
Assume full obligation to meet all demands of our customers; accomplish ongoing advancements by promoting the advancement of our customers; become the final permanent cooperative partner of clientele and maximize the interests of shoppers for High Quality Low Melt FFS Film - EVA Packaging Film for Rubber Chemicals – Zonpak, The product will supply to all over the world, such as: venezuela , Kazakhstan , Zurich , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Eden
from Mali
- 2018.10.01 14:14
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Jack
from Kenya
- 2017.02.14 13:19
