OEM China Film Packaging Material - EVA Batch Inclusion Film – Zonpak
OEM China Film Packaging Material - EVA Batch Inclusion Film – Zonpak Detail:
ZonpakTM EVA batch inclusion film is a special kind of packaging film with specific low melting point. It is mainly used on the automatic FFS (form-fill-seal) packaging machine to make little packages (100g-5000g) of rubber additives or chemicals. Due to the film’s property of low melting point and good compatibility with rubber and plastic, these little packages can be direct put into an internal mixer during mixing process at the user’s end, and the bags made of the film will melt and fully disperse into the mix as an effective ingredient. It brings convenience to the material users and eliminates packaging waste disposal.
Different melting points are available according to customers’ requirement. Stable chemical properties and high physical strength of the film make it suitable for most rubber chemicals and automatic packaging machines.
|
Technical Standards |
|
| Melting point | 65-110 deg. C |
| Physical properties | |
| Tensile strength | MD ≥16MPa TD ≥16MPa |
| Elongation at break | MD ≥400% TD ≥400% |
| Modulus at 100% elongation | MD ≥6MPa TD ≥3MPa |
| Appearance | |
| Surface of the product is flat and smooth, there is no wrinkle, no bubble. | |
Product detail pictures:
Related Product Guide:
Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for OEM China Film Packaging Material - EVA Batch Inclusion Film – Zonpak, The product will supply to all over the world, such as: Turin , Dominica , French , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Monica
from Mongolia
- 2017.12.02 14:11
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Henry stokeld
from Luxemburg
- 2018.02.12 14:52
