OEM Factory for Flexible Packaging Film - Low Melting Point EVA Film – Zonpak
OEM Factory for Flexible Packaging Film - Low Melting Point EVA Film – Zonpak Detail:
ZonpakTM low melting point EVA film is a special kind of packaging film which can be used on automatic form-fill-seal (FFS) bagging machines to make little bags of rubber additives (e.g. 100g-5000g). The bags of additives can be direct put into a mixer during rubber mixing process. Bags made of the film can easily melt and fully disperse into the rubber as an effective ingredient.
PROPERTIES:
- A wide range of melting points are available for different applications.
- With stable chemical properties, fits most rubber chemicals.
- With good physical strength, is suitable for most automatic bagging machines.
- Eliminate the disposal of packaging waste for the material users.
- Helps material users raise production efficiency while decrease material waste.
APPLICATIONS:
- peptizer, anti-aging agent, curing agent, aromatic hydrocarbon oil
Technical Standards |
|
Melting point | 65-110 deg. C |
Physical properties | |
Tensile strength | MD ≥16MPa TD ≥16MPa |
Elongation at break | MD ≥400% TD ≥400% |
Modulus at 100% elongation | MD ≥6MPa TD ≥3MPa |
Appearance | |
Surface of the product is flat and smooth, there is no wrinkle, no bubble. |
Product detail pictures:
Related Product Guide:
Usually customer-oriented, and it's our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for OEM Factory for Flexible Packaging Film - Low Melting Point EVA Film – Zonpak, The product will supply to all over the world, such as: Austria , Swiss , Saudi Arabia , Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Judith from Montreal - 2018.06.19 10:42
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Martin Tesch from Greece - 2018.02.04 14:13